This is a revolutionary Clean Roller unit which uses a non-contacting magnet gear as the drive gear to prevent dust from being generated inside the equipment.
-
Magnetic gear adopted
By using magnet gears in the device drive section, we have minimized the generation of minute dust from the gears, which was not possible until now.
This makes it possible to handle high-density target products.
-
High maintainability
The switchboard and air-related components are all located under the stand, allowing centralized maintenance on the operating side.
-
Centralized touch panel
The inclusion of a touch panel enables centralized management of operations.
-
Clean roll up/down mechanism
When the target product is fed or discharged, the upper roll is lifted to allow the tip to escape and remove dust.
This is effective in preventing the cover film of the target product from peeling off and preventing thin plate types from getting caught in the product.
| Specifications | |
|---|---|
| size | W308×D1185×H1265±50mm |
| weight | Approximately 140 kg |
| Effective cleaning width | 640mm |
| Target product thickness | 0.1 to 2.0 mm |
| Conveying speed | 0 to 18 m/min (variable) |
| Pass Line | 950±50mm |
| Input voltage | AC100V±10% |
| Power Consumption | 160VA |
| Input Air Pressure | 0.5MPa |
| Air consumption | 10L/min |
Contact
We provide the most appropriate products for customers.
Click below for inquiries.
