ATRON® SP 200 is an aqueous-alkaline surfactant cleaner, specifically developed to remove baked-on fluxes from solder pallets and condensation traps.
ATRON® SP 200 can also be used for the removal of unsoldered solder pastes from SMT stencils. The cleaner is suitable for air assisted, ultrasonic and spray-in-air cleaning equipment.
-
Areas of application – Condensation traps / Solder frame / Stencil Cleaning
-
Advantages compared to other cleaners
-
Simple, easy-to-use handling.
-
3 to 10 times longer bath life than traditional surfactant cleaners. The reduced number of bath changes results in a lower volume of cleaning agent disposal. Thereby, process costs are reduced. This was proven by several customer cases.
-
Excellent compatibility with aluminum and epoxy surfaces.
-
No build-up of organics in the rinsing section.
-
Approved by leading international cleaning equipment and stencil manufacturers.
-
ATRON® SP 200 is also suitable for cleaning conveyor fingers or the manual removal of extremely baked-on flux residues in solder ovens and similar applications.
-
| Process Steps | |||
|---|---|---|---|
|
Cleaning Process
|
1. Cleaning
|
2. Rinsing
|
3. Drying
|
| Air assisted cleaning | ATRON® SP 200 | Recommended: DI-water or tap water | Hot or circulating air |
| Ultrasonic | ATRON® SP 200 | Recommended: DI-water or tap water | Hot or circulating air |
| Spray-in-air | ATRON® SP 200 | DI-water or tap water | Hot or circulating air |
Machine Test Center
Analytical Center
| Technical Data* | ||
|---|---|---|
| Density | (g/ccm) at 20°C/68°F | 1.00 |
| Surface tension | (mN/m) at 25°C/77°F | n.a. |
| Boiling point | °C/°F | 100°C / 212°F |
| Flash point | °C/°F | None until boiling |
| pH value | 10g/l H2O | 12.0 |
| Vapor pressure | (mbar) at 20°C/68°F | Approx. 23 |
| Cleaning temperature | °C/°F | 20-50°C / 68-122°F |
| Solubility in water | - | Soluble |
| Application concentration |
Concentrate | 10 - 25 % |
| HMIS Rating | Health-Flammability-Reactivity | 0 - 0 - 0 |
* Please note that the information above represents ATRON® SP 200 at 15 % concentration.
Product Features & Cleaning Standards
-
100% compliance with EU guidelines (RoHS 1, 2 & 3, WEEE)
-
Extensively tested and suitable for cleaning lead-free solder pastes
-
Product is free of any critical substances according to SIN & SVHC lists
Environmental, health & safety regulations
-
ATRON® SP 200 is water-based and biodegradable.
-
ATRON® SP 200 is formulated free of any halogenated compounds and therefore environmentally friendly.
-
Refer to the SDS for specific handling precautions and instructions.
-
This product is non-hazardous material.
Contact
We provide the most appropriate products for customers.
Click below for inquiries.
